KITCHEN APPLIANCE EXPERT

The submersible mixer can device in the pool, pool side wall angle range, the peripheral device constraints is relatively small, affect the pool wall layout is very small. Device selection of stent can select the pool wall and the bottom of the pool in two ways, repair perhaps the usual protection, capable of diving mixer hanging out of the water, diving mixer device approaches have the following several ways: (1) the cantilever device for small mixer device on the cantilever beam, the beam briefly together or bolt in the pool, the cantilever rod length does not exceed 3m. (2) the ground device stirrer is fixed a bracket on the ground, commonly used in the shallow pool. (3) single rod device most commonly used methods is stirrer device along the dress on the pool wall of a guide rod to decrease or increase. When the pool depth H<4m advocates selecting device system I. The diving depth diving mixer can adjust the direction of straight according to need, and can rotate around the guide rod rotation of the maximum point of view is ± 60 ° in the horizontal plane, a lifting system, support bracket and the lower bracket and pool related junction with expansion bolts fixed, without reservation hole. When the pool depth H>4m advocates selecting device system II, need to do a concrete foundation (or steel structure base on the bottom of the pond). Lifting system base, rope fixed frame and the guide base and the pool of relevant junction with expansion bolts fixed, without reservation hole. Device system II guide rope instead of guide rod, transportation convenience, the device has simple features such as. The system can prevent the guide rod, carrying the twists and turns because of deformation and affect the normal use of the situation can be improved; useful pool depth deep situation, attack because the device error bars and cause can not be normal lifting surface, in a cantilever tank top device conditions, operation more convenient and reliable.